Reverse Osmosis Pump – Domestic System

This pump is perfect for boosting pressure to your Reverse Osmosis filter. To get good water output from your RO unit you need reasonable water pressure ie 3 Bar or more. Most properties in the UK have this but some mains water pressure can be as low as 1.5 bar. If your water pressure is too low this pump will remedy the issue by greatly improving the amount of water produced by your Reverse Osmosis unit. It is simple to fit either before or after you’ve installed your Reverse Osmosis unit. The unit needs to be fitted just before the filter. It uses a standard UK 3 pin plug (you can use adapters if in Europe etc) and can be run off an extension cable. Please note this is a high quality unit which we are pricing at cost on the basis that you buy it with your Reverse Osmosis unit. If you buy it seperately we reserve the right to add £10 plus postage – but don’t worry, we’ll let you know beforehand if we decide to do this. Code PUMP1