High-quality ABS filament – Multiple colors 1.75-2.85mm – 1 kg, 2.85mm – Red – Real Filament

ABS filament multiple colors 1.75/2.85mm 1000 g for 3D printers is of superior quality, produced in The Netherlands. Real filaments guarantees that the ABS is high-quality and diameter consistent filament, giving you the best 3D printing experience. Generally you need a heated bed to print with ABS and a heated chamber is preferred. In the Real filament ABS line, there are also ABS plus and Pro available, which make it easier to print. The ABS is a pure base material, optimized for 3D printing, giving the best performance possible.

ABS (Acrylonitrile Butadiene Styrene) filament has been in use for 3D printing for a long time. It used to be the most popular 3D print material, but due to the properties of ABS including high shrinkage it’s hard to work with. Compared to other materials ABS still has some advantages including that its gasoline resistant, non-translucent and a soft bendable thermoplastic. Also compared to PLA it has a much higher glass transition point. ABS is an oil based product, making it less environmentally friendly than PLA is, and while printing it tends to give a bad chemical smell, so you probably want to use this in well ventilated conditions.

This filament will require more effort to print well. If you are using ABS to print small strong parts, you may get away with just using   3DLAC   on a 65-80 degrees heated bed.   Kapton   tape is another product where ABS will print on, but it will require a higher temperatures around 110 degrees. For extruding the filament we recommend a temperature of 245 degrees, although it may extrude as low as 220 degrees, the layer bonding won’t be as strong. For larger prints you should look into   PETG   filament first, without a heated chamber you will not be able to print this material without warping and cracking.

The Real ABS comes in many different colors directly from stock.Check also the ABS plus and Pro lines for more optimized printing results. For larger quantities and custom batches, feel free to contact our   sales department.

Specifications:

SKU  

NLABSNATURAL1000MM175  

GTIN  

8719128325354  

Filament properties  

Material

ABS  

Variant  

ABS  

Diameter  

1.75 mm  

Weight filament  

1000 g  

Color  

Neutral  

Printing properties  

Temperature – extruder  

230 – 250 °C  

Temperature – heated bed  

60 – 70 °C  

Heated bed temp. – Kapton  

90 – 110 °C  

Spool dimensions  

Outer diameter  

200 mm  

Inner diameter  

50 mm  

Width  

70 mm  

Weight spool  

300 g  

Length filament  

400 m